Posts Tagged: fuels

Five things you can do this weekend to help protect your home from wildfire

Despite recent rains, fire remains a danger across California, as there's still plenty of time this fall for grass, woody debris and other flammable material to become dry and ignite.

“The smaller the fuels – pine needles, grass, and small twigs – the faster they can dry out, meaning they will be ready to burn again a few days or weeks after a large rainstorm,” said Susie Kocher, a UC Cooperative Extension forestry and natural resources advisor for the Central Sierra, urging residents to take steps to prevent or limit potential fire damage.

When it comes to “home hardening” and essential wildfire preparations in this age of drought and climate change, not every project requires a bank-breaking budget and an army of contractors.

There are small – but significant – home and landscaping improvements that most people can complete by themselves during a single weekend, with a quick run to the hardware store and some basic planning and safety precautions.

“There are a lot of factors that play into your home's vulnerability to ignition; small changes and upgrades can help reduce some of that risk for people living in high wildfire risk areas,” Kocher explained. “The bigger projects like replacing windows and roofs are very important, but there are definitely smaller projects that people can tackle right away at lower cost that also reduce risk. The main goal of these actions is to reduce the risk that wildfire embers can ignite your home.”

Kocher recommends these five measures as simple but crucial ways to bolster your home's wildfire resiliency.

Clean debris from your roof. Because of its expansive surface, the roof is the most susceptible area of your house to embers. Removing accumulated leaves and needles is especially important if you have a “complex roof” with dormers or other elements – that's where embers gather, too, and could come in contact with flammable siding. (And while you're up there, give those gutters a good swabbing.) Learn more about protecting your roof and gutters.

Install metal flashing in vulnerable spots. Replacing all your siding with noncombustible material can be pricey, but a more manageable task would be adding corrosion-resistant metal flashing to select areas: roof-to-wall intersections, the place where the chimney comes out of the roof, and the edge where the deck meets the house. Learn other ways to shore up your siding.

Remove debris from between the boards of your deck and fence. Embers can ignite leaves and needles stuck between the boards, so be sure to keep those gaps clean and clear. Learn additional steps to harden your deck and prepare your fence.

Take out all vegetation (alive or dead) within five feet of your home. Creating defensible space immediately next to your home is a top priority, so be sure there's nothing combustible within this “Zone Zero.” Plants, mulch, woodpiles, wicker furniture or anything that can catch fire should be removed. Learn what to do in the other “zones” as you move farther from your home. 

Inspect vents and upgrade to finer mesh screens. Install or swap in noncombustible, corrosion-resistant metal mesh screening that is at least 1/8” (1/16” would be even better but requires more frequent maintenance). These screens help prevent embers from entering your attic and crawl space. In addition, put together some vent covers that can be deployed if you have time before a wildfire arrives. Learn other ways to reduce vulnerability of vents.

For more in-depth explanations and next steps, Kocher suggests visiting the UC ANR wildfire website (https://ucanr.edu/sites/fire/Prepare) and reviewing this home retrofit guide (https://bit.ly/3RaL54u).

Free wildfire publication simplifies understanding fuel-reduction permits on private land

UCCE forest advisor helps landowners, community groups determine best project options

As Californians prepare for another year of drought and an anticipated intense fire season, landowners and organizations across California have been working to reduce forest fuels – flammable woody material – that can endanger their properties and communities.

For many of them, however, their urgent efforts hit a sizable speed bump: a massive rulebook that describes, amid a thicket of other information, the permits required before people can treat or remove fuels – as well as a litany of attached requirements, restrictions and stipulations.

“The California Forest Practice Rules are 410 pages, in font size 6,” said Yana Valachovic, UC Cooperative Extension forest advisor for Humboldt and Del Norte counties and registered professional forester. “Trying to figure out what permit vehicles make sense in the rulebook is not easy even for the experienced professional forester.”

To assist private landowners and community groups in deciphering the rules and determining their most cost-effective options, Valachovic took the lead in writing a new guide, “Planning and Permitting Forest Fuel-Reduction Projects on Private Lands in California,” available as a free resource in the UC Agriculture and Natural Resources catalog.

“We tried to create a system where all the permits are laid out side-by-side, and put in a decision tree framework to help make it easier,” said Valachovic, highlighting the publication's tables that break down the project goals and parameters a permit applicant should think about when weighing their choices.

Considerations include whether the project is pre- or post-wildfire, the location and dimensions of trees targeted for removal, the conditions of the site before and after the project, potential time limits, commercial options, and, crucially, budget constraints – given that the permitting process could comprise up to one-third of total project costs.

A primer for planning and preparation

Chris Curtis, the unit forester for CAL FIRE's Humboldt-Del Norte Unit, said that he and his colleagues are grateful for this new tool and plan to use it as an “over the counter” handout for community members. He added that the charts summarizing timber-harvesting regulations and possible funding sources are especially helpful.

“These give a landowner a starting place to sort through the many commercial timber harvesting documents and fuel-modification project funding source options available,” Curtis said. “A landowner is self-guided to a few options that will seem most appropriate, and this will facilitate a resource professional to assist that person in selecting the most appropriate permitting.”

The publication helps prepare the landowner or community entity (such as Resource Conservation Districts, Fire Safe Councils or other concerned groups) for the types of questions that might come up in preliminary planning conversations with a registered professional forester or RPF.

Just as a homeowner would talk with a contractor before tackling a construction project, landowners and community groups must consult with an RPF, Valachovic said. RPFs have the specialized knowledge of forest practice rules and regulations related to water, air quality and endangered species protections, and the license to file the permitting documents.

“That's what I do in my job: Landowners come to me and we start talking about goals and objectives,” she said. “We start thinking about potential timelines – which goals are short-term, which are long-term – and how we can put an operational plan together to help those landowners achieve their goals.”

Long-term projects, short-term actions

Among the many practical tips outlined in this guide, Valachovic emphasized one in particular: for landowners dipping their toes into fuel reduction for the first time, keep the project “simple and realistic.”

And while even smaller projects could be more expensive this year due to higher costs for gas, equipment and supplies, she said that now is still “a great time to plan,” as fuel-reduction projects can take months to develop and execute.

In the short-term, however, Valachovic stressed that the extremely dry conditions across the state make it imperative for Californians to harden their homes, manage the fuels (i.e., landscape plants, stored wood, tall grass, etc.) immediately adjacent to their homes, and devise and review family emergency plans; see UC ANR's Wildfire Preparation page for detailed information and resources.

“There are a lot of immediate actions that people can be doing this year to help mitigate their wildfire risks and prepare for the unexpected,” she said.

In addition to Valachovic, co-authors of “Planning and Permitting Forest Fuel-Reduction Projects on Private Lands in California” are Jared Gerstein of BBW Associates and Brita Goldstein, UCCE staff research associate in Humboldt and Del Norte counties; both are registered professional foresters.

Becoming a fire-adapted community

Between January 1 and March 15 of this year, 374 wildfires have burned 3,240 acres in California. According to CALFire, the five-year average for the same time period is 359 wildfires burning 1,124 acres. All of this during California's supposed wet winter months. As the East Coast bundles up and digs out from yet another storm, we in California have been shedding layers and applying sunscreen. Though we appreciate lower than normal seasonal disorder blues, we are facing a tough year ahead in terms of potential fire activity. The forest and shrub ecosystems are dry and with little relief in sight, many who live and recreate in the in these areas and their surrounding communities, are crossing their fingers that wildfire will not disrupt their lives this year.

The magnitude of wildfires especially affects those communities that are part of the wildland-urban interface (WUI). Many communities, whose back doors open out into conifer forests, shrub fields or grasslands, have been working towards becoming more resilient and proactive about wildfire. One way is to become a Fire-Adapted Community. A Fire-Adapted Community is a community that can survive a wildfire with little or no assistance from firefighters. The community acknowledges and takes responsibility for this by preparing for a fire at multiple levels including the use of appropriate building construction materials, and proper vegetation management. Members of the community are concerned with safety: safety of the individual, homes and businesses, community infrastructure, open spaces, riparian areas, any and all community assets. They address issues, plan, prepare and work with their local government agencies, fire services and citizenry to reduce their risk if a wildfire comes their way.

There are four elements to a Fire-Adapted Community:

1. Community collaboration - Strong fire-adapted communities have a role for everyone. This means that all members of the community (government, schools, businesses, homeowners, renters, fire services, emergency responders, etc.) work together to raise awareness of fire risks and increase knowledge of fire ecology and mitigation actions. This is done through various outreach activities, partnerships and incentives. It also includes completing a Community Wildfire Protection Plan (CWPP) that will assess your community's risk and identify actions to take to lower those risks. It could also involve participating in the Ready Set Go! program which is a collaboration between residents and local fire departments to help people prepare (Ready), understand the threats (Set) and evacuate early (Go) in a fire event.
   
   
2. Surrounding environment – Fire adapted communities look beyond their fences to see what risks exist and what actions can be taken in the surrounding landscape to reduce those risks. These actions can include fuels reduction projects, improving community ingress and egress and/or the protection and enhancement of riparian and wildlife habitat.
   
   
3. Planning and regulatory considerations - Fire adapted communities work with their local and state government agencies to ensure that policies, standards and regulations support actions that reduce the risks of wildfire in the community. This may include building codes and standards that encourage the use of non-combustible materials in home construction; the creation of community protection zones that would create a safe environment in the case of resident evacuation; maintaining large turnaround areas for large pieces of equipment; and having a reliable and easily accessible water system.
   
   
4. Neighborhood, landscapes and buildings - All members of a fire-adapted community work to ensure that their homes, businesses and community assets are prepared in the event of a wildfire. This means reducing flammable materials around homes and businesses; maintaining the immediate landscape and using appropriate, less combustible building and landscaping materials; creating fuel buffers around the community; ensuring that streets and homes are well signed; creating safety zones for residents and animals; having a communication plan – who to call and how to connect if a fire occurs; and designating evacuation routes.

All of these actions taken together, in a collaborative process, help build a strong fire adapted community that is better prepared to face and survive a wildfire.

       

In the Sierra Nevadas, Incline Village, Nev., is an example of a fire-adapted community. For the past 10 years, they have implemented fuels reduction projects based on their CWPP and involved homeowners and local businesses in planning and implementing mitigation actions. Recently, their goal was to engage a larger audience, build personal connections and recruit new volunteers. Their efforts led to a large gathering where participant input was an essential part of community building and the creation of next steps for the fire adapted community leadership. One participant said that it “Gave me hope that a coordinated, cohesive strategy to prepare our community is seriously underway.”

“I really admire the many active citizens in communities throughout the Sierra Nevada working to reduce wildfire hazards in their neighborhoods," said Susie Kocher, UC Agriculture and Natural Resources forestry and natural resources advisor. "It really will take all of us working together to help our communities become adapted to wildfire.”

Becoming a fire adapted community also means joining a network of people and projects. The Fire Adapted Communities Learning Network is a repository of information and encourages the development and sharing of ideas that can help your community build capacity, raise awareness and take actions towards wildfire resiliency.

For more information on becoming a fire adapted community, or other items mentioned in this blog, please visit:

• Lessons in Community Engagement from North Lake Tahoe
• Becoming a Fire-Adapted Community
• CWPP process
• Fire-Adapted Communities Learning Network
• A Guide to Fire-Adapted Communities
• UCCE Nevada's award winning program

 Images courtesy of the National Fire Protection Association.

The effects of density and high severity fire on tree and forest health

Hike off-trail through most any part of the Sierra Nevada and you may find yourself losing your hat to a low hanging branch, your shoe to a thicket of dead and dying brush, or your companion to the crevice hidden by the wall of young trees.

There is no doubt that the forests of the Sierra Nevada, while amazingly beautiful, have grown dense with vegetation. Consequently, forests have become increasingly susceptible to high severity fires, which negatively impact the forest's overall health and our ability to enjoy it.

There is a relationship between a healthy forest and its density. The denser the forest, the more competition individual trees have for valuable resources, such as water, light and nutrients. The effects of competition on tree growth and death are profound – the more trees per acre, the smaller the diameter of the individual trees (meaning less growth) and the higher the likelihood trees will be negatively impacted by pests, diseases, and poor health, ultimately leading to tree mortality. Theories in ecology, supported by field data and statistical analysis, predict that some trees will outperform others and the difference in performance increases with crowding. Unfortunately, evidence suggests that excess density is causing increased mortality in the Sierra.

John Battles, forestry professor at UC Berkeley and member of the Sierra Nevada Adaptive Management Project (SNAMP), is leading a team of UC Berkeley researchers and graduate students in developing vulnerability profiles that will help to quantify individual trees' probability of survival. The growth response of individual trees is the primary measure of forest health in the SNAMP study. The team believes growth is an excellent indicator of tree vitality and that a necessary (but not sufficient) condition for a healthy forest is healthy trees.

The team collected and processed more than 12,000 tree cores to develop long term growth and vulnerability profiles for different tree species. Their results supported the accepted notion that, in general, good growth was an indicator of good health. However, they also found that "bad years," when growth was substantially lower than normal, were strong predictors of death. In addition, they reported that bad years had a cumulative impact that spanned decades. In other words, the best predictor of potential death was for a tree to experience two or more bad years over the most recent 20 – or even 40 – years. The team has been working to translate these relationships between tree growth and survival to produce a vulnerability index by species and size. One goal is to have some sense on how vulnerable a stand is before many trees start to die.

Another key question being asked by SNAMP researchers is whether fuels treatment projects designed to modify fire behavior also improve forest health. Battles and his team hypothesize that thinning a dense forest will improve individual tree and overall forest health, as well as reducing fire risk. Resilience, or the capacity to recover from adverse conditions, is the goal. Histories captured in tree core samples show that trees can survive adverse conditions such as fire and drought. While studies have shown that properly implemented fuel treatments are effective at reducing hazardous fire potential, there are secondary ecological effects that can impact forest resilience either positively or negatively depending on the treatment type, timing and intensity. In a study at the UC Blodgett Forest Research Station, researcher Brandon Collins and others looked at large, dominant tree growth responses, measured seven years after the implementation of some of the most common fuel treatments, to estimate that forest's health. Across the five tree species analyzed, observed mortality and future vulnerability were consistently low in the areas where only mechanical treatment occurred. Fire-only treatment had results similar to areas that did not receive treatments for all species except Douglas-fir. Mechanical-plus-fire treatments, however, had high observed mortality and future vulnerability for white fir and sugarpine. Given that these large, dominant trees play a key role in terms of wildlife habitat, carbon sequestration and soil stability, these results have implications for understanding longer-term impacts of common fuel treatment types on forest resilience.

Through the analysis of tree core samples, Battles and his team hope to provide clarification on conditions that improve individual tree health and the overall health of the forest. The final report on SNAMP, with the results of the forest health study described here, will be available May 31, 2015, at http://snamp.cnr.berkeley.edu/.

 

 

Read more